The Open Lighting Project has moved!
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "OLA Command Line Tools"
From wiki.openlighting.org
(Created page with '=== ola_artnet === This tool queries and sets the ArtNet node's parameters. Options: * -d, --dev <device_id> The device id to configure. * -l, --long_name <long_name> Set the l…') |
(No difference)
|
Revision as of 13:39, 8 August 2009
ola_artnet
This tool queries and sets the ArtNet node's parameters.
Options:
- -d, --dev <device_id> The device id to configure.
- -l, --long_name <long_name> Set the long name of the ArtNet device
- -n, --name <name> Set the name of the ArtNet device
- -s, --subnet <subnet> Set the subnet of the ArtNet device
$ ola_artnet -d 1 Name: ola - ArtNet node Long Name: ola - ArtNet node Subnet: 0 $ ola_artnet -d 1 -n "new name" -s 1 Name: new name Long Name: ola - ArtNet node Subnet: 1
ola_usbpro
This tools queries and control the parameters of the Enttec USB Pro devices.
Options:
- -d, --dev <dev_id> The device id to configure.
- -s, --serial Show the serial number for this device.
- -b, --brk <brk> Set the break time in 10.67 microseconds steps (9 - 127)
- -m, --mab <mab> Set the make after-break-time in 10.67 microseconds steps (1 - 127)
- -r, --rate <rate> Set the transmission rate to <rate> frames per second (1-40)
- -s, --serial Get the serial number.
$ ola_usbpro -d 5 Device: 5 Firmware: 1.44 Break Time: 96.03us MAB Time: 96.03us Packet Rate: 40 packets/sec $ ola_usbpro -d 5 -s Device: 5 Serial: 02050016 $ ola_usbpro -d 5 -m 1 -b 9 -r 30 Device: 5 Firmware: 1.44 Break Time: 96.03us MAB Time: 10.67us Packet Rate: 30 packets/sec
