OLA Command Line Tools
From OpenDMX.net
Contents |
ola_artnet
This tool queries and sets the ArtNet node's parameters.
Options:
- -d, --dev <device_id> The device id to configure.
- -l, --long_name <long_name> Set the long name of the ArtNet device
- -n, --name <name> Set the name of the ArtNet device
- -s, --subnet <subnet> Set the subnet of the ArtNet device
$ ola_artnet -d 1 Name: ola - ArtNet node Long Name: ola - ArtNet node Subnet: 0 $ ola_artnet -d 1 -n "new name" -s 1 Name: new name Long Name: ola - ArtNet node Subnet: 1
It can also be used to list the IP addresses of the ArtNet devices listening to a particular universe:
$ ola_artnet -u 0 -d 1 10.0.0.88
ola_dmxconsole
Send data to a OLA service.
Options
- -u The universe ID to send data for
# open a console for universe 10 ola_dmxconsole -u 10
some shortcuts
q = quit
f = all channel @ full
b = all channels blackout
arrow keys = move between channels
up/down = coarse change channel value
+/- = fine change channel value
space bar = toggle channel value 0 / full
m = change display mode (% hex dec)
n = toggle display 1 thru 512 or 0 thru 511
u = undo
del = shift channels left
ola_dmxmonitor
Monitor the values on a DMX512 universe
Options
- -u The universe ID to monitor
# open a monitor for universe 10 ola_dmxmonitor -u 10
in the app, you can change :
- display in octal/hexa/decimal
press m
- increment/decrement channel
press + or -
- increment/decrement per 10 unit
press page UP or page DOWN
ola_e131
Manage E1.31 options.
Option:
- -d, --dev Id of the device to control.
- -h, --help Display this help message and exit.
- -i Input port
- -p, --port_id Id of the port to control
- --preview_mode Set the preview mode bit
# turn preview mode on $ ola_e131 -d X -p 1 --preview_mode
ola_set_priority
Sets the priorities for ports. See OLA Merging Algorithms for more information on what the does.
Options:
- -d, --device <device> Id of device to patch.
- -h, --help Display this help message and exit.
- -i, --input Set an input port
- -o, --override <value> Set the port priority to a static value.
- -p, --port <port> Id of the port to patch.
# Override an input port's priority $ ola_set_priority -d X -p 1 -i -o 50 # Reset an output port to inherit mode $ ola_set_priority -d X -p 1
ola_streaming_client
Stream data to the OLA server.
Options:
- -d, --dmx <dmx_data> DMX512 data, e.g. '1,240,0,255'
- -h, --help Display this help message and exit.
- -u, --universe <universe_id> Id of universe to send data for.
# send a single update $ ola_streaming_client -u 1 -d 1,2,255,255 # read data from stdin $ dmx_generator | ola_streaming_client -u 1
ola_usbpro
This tools queries and control the parameters of the Enttec USB Pro devices.
Options:
- -d, --dev <dev_id> The device id to configure.
- -s, --serial Show the serial number for this device.
- -b, --brk <brk> Set the break time in 10.67 microseconds steps (9 - 127)
- -m, --mab <mab> Set the make after-break-time in 10.67 microseconds steps (1 - 127)
- -r, --rate <rate> Set the transmission rate to <rate> frames per second (1-40)
- -s, --serial Get the serial number.
$ ola_usbpro -d 5 Device: 5 Firmware: 1.44 Break Time: 96.03us MAB Time: 96.03us Packet Rate: 40 packets/sec $ ola_usbpro -d 5 -s Device: 5 Serial: 02050016 $ ola_usbpro -d 5 -m 1 -b 9 -r 30 Device: 5 Firmware: 1.44 Break Time: 96.03us MAB Time: 10.67us Packet Rate: 30 packets/sec
