Difference between revisions of "OLA on Windows with VMWare"

Latest revision as of 19:27, 31 May 2018

This page has migrated

This page has migrated to our new site, please see https://www.openlighting.org/ola/tutorials/ola-on-windows-via-vmware/.

This content will not be updated and is just left here for reference and will be removed at some point in the future, see the link above for the most up-to-date version.

This explains how to run OLA on a Windows system using VMWare. This uses virtualization so it's not recommended for real time lighting control. However it's useful if you want to experiment with OLA and perform tasks that aren't time sensitive like Running RDM Responder Tests

Warning: There have been reports of the VMWare Player USB Stack dropping frames, which causing problems with the RDM Responder tests. The recommended way of running the tests is to use the Raspberry Pi.

Prerequisites

A Windows PC with a working internet connection.
At least 20G of free hard disk space. Chance are you won't need that much.

Setting up the Linux System

This tutorial is based on these excellent instructions. The instructions are for Windows 7, but works fine on XP as well.

Download & Install VMWare Player

Download the free VMWare Player. You'll need to complete the survey and provide an email address. Install this on your windows machine. Reboot.

Download & Install Linux Distribution

I recommend Ubuntu. It's fairly easy to use and stays up to date. Get the latest version from here. Once this is done you should have an .iso file which will be around 600MB.

Setup a New Virtual Machine

Open VMWare Player, select "Create New Virtual Machine". Choose "Installer Disk Image" and point to the Linux .iso file you downloaded.

On the next screen setup a username & password. You can then control where the VM image is stored and the size of the image. The defaults are fine.

Click Finish to setup the Linux image. Installation of Ubuntu then begins.

You'll be asked if you want to install VMWare tool for Linux. Say yes as we'll use them later. The download will continue along with the install. This stage can take quite a while.

Once complete, you'll be presented with a graphical login screen showing the username that you setup before. Login to the system and you'll be shown the desktop.

Next enter Unity mode. This seamlessly merges the Linux windows with the Windows desktop. You can also copy and paste between Windows and Linux at this point.

Finally open the Linux terminal application as shown below. You'll need to move your mouse to the Start button for the Unity menu to appear.

Now we'll confirm that the network is working. Type:

ping www.google.com

You should see responses like what's below. Hit Control-C to exit the ping program.

At this point we have a working Linux system. Time to install OLA

Installing OLA

These instructions closely follow OLA on Linux.

Install the dependencies

sudo apt-get install libcppunit-dev libcppunit-1.12-1 uuid-dev pkg-config libncurses5-dev git libtool autoconf automake  g++ libmicrohttpd-dev libmicrohttpd5 protobuf-compiler libprotobuf-lite6 python-protobuf libprotobuf-dev libprotoc-dev zlib1g-dev bison flex make

Note: More recent distributions may offer libprotobuf-lite7 instead of libprotobuf-lite6, which is an acceptable substitution.

Then run ldconfig:

sudo ldconfig

Checkout OLA

Run the following to clone the OLA code:

  git clone https://github.com/OpenLightingProject/ola.git ola
  cd ola

Configure, build and test OLA

Type these

  autoreconf -i
  ./configure --enable-rdm-tests
  make
  make check
  sudo make install
  sudo ldconfig

If you want to do RDM responder testing you must add --enable-rdm-tests

Using OLA

At this stage you can start OLA by running

  olad -l 3

The -l flag controls the logging level from 0 (log nothing) to 4 (debug logs). 3 is log level info, which is usually enough for most people.

Now find the IP address of your Linux instance:

  /sbin/ifconfig eth0

Look for a line that starts with inet addr:.

Open up a browser on the Windows PC and type in the IP address followed by :9090. This will bring up the OLA web console.

USB Devices

When using OLA with VMWare you need to make sure that any DMX USB devices are correctly bound to the guest OS (Linux).

http://www.vmware.com/support/ws45/doc/devices_usb_ws.html describes how to set this up.

Updating OLA

From time to time you may want to update the code. From within the existing ola directory run:

  git pull
  autoreconf -i
  ./configure --enable-python-libs
  make
  make check
  sudo make install

Not all of these steps are required each time, but unless you have a good idea of what changed it's easier just to run everything.

@@ Line 1: / Line 1: @@
+{{PageMigrated|url=https://www.openlighting.org/ola/tutorials/ola-on-windows-via-vmware/}}
 This explains how to run [[OLA]] on a Windows system using VMWare. This uses virtualization so it's not recommended for real time lighting control. However it's useful if you want to experiment with OLA and perform tasks that aren't time sensitive like [[OLA RDM Responder Testing| Running RDM Responder Tests]]
+<div style="border:1px solid red; background-color: #ffcccc; padding: 2px">Warning: There have been reports of the VMWare Player USB Stack dropping frames, which causing problems with the RDM Responder tests. The recommended way of running the tests is to use the [[OLA_Raspberry_Pi | Raspberry Pi]].</div>
 == Prerequisites ==
@@ Line 58: / Line 62: @@
 <pre>
-sudo apt-get install libcppunit-dev libcppunit-1.12-1 uuid-dev pkg-config libncurses5-dev git libtool autoconf automake  g++ libmicrohttpd-dev libmicrohttpd5 protobuf-c-compiler libprotobuf-lite6 python-protobuf libprotobuf-dev  zlib1g-dev
+sudo apt-get install libcppunit-dev libcppunit-1.12-1 uuid-dev pkg-config libncurses5-dev git libtool autoconf automake  g++ libmicrohttpd-dev libmicrohttpd5 protobuf-compiler libprotobuf-lite6 python-protobuf libprotobuf-dev libprotoc-dev zlib1g-dev bison flex make
 </pre>
+Note: More recent distributions may offer libprotobuf-lite7 instead of libprotobuf-lite6, which is an acceptable substitution.
 Then run ldconfig:
@@ Line 72: / Line 78: @@
 <pre>
-   git clone https://code.google.com/p/linux-lighting/ ola
+   git clone https://github.com/OpenLightingProject/ola.git ola
    cd ola
 </pre>
@@ Line 81: / Line 87: @@
 <pre>
    autoreconf -i
-   ./configure --enable-python-libs
+   ./configure --enable-rdm-tests
    make
    make check
@@ Line 88: / Line 94: @@
 </pre>
-If you want to do RDM responder testing you '''must''' add --enable-python-libs
+If you want to do RDM responder testing you '''must''' add --enable-rdm-tests
 == Using OLA ==
@@ Line 111: / Line 117: @@
 Open up a browser on the Windows PC and type in the IP address followed by :9090. This will bring up the OLA web console.
 [[Image:Windows_ola_webui.JPG|frameless]]
+== USB Devices  ==
+When using OLA with VMWare you need to make sure that any DMX USB devices are correctly bound to the guest OS (Linux).
+http://www.vmware.com/support/ws45/doc/devices_usb_ws.html describes how to set this up.
+== Updating OLA  ==
+From time to time you may want to update the code.  From within the existing ola directory run:
+<pre>
+  git pull
+  autoreconf -i
+  ./configure --enable-python-libs
+  make
+  make check
+  sudo make install
+</pre>
+Not all of these steps are required each time, but unless you have a good idea of what changed it's easier just to run everything.
+==See Also==
+*[[Building OLA for Windows]] - In the future this may provide a workable alternative
 [[Category:Tutorials]]

Personal tools

Difference between revisions of "OLA on Windows with VMWare" - wiki.openlighting.org

Search

Navigation

Tools