Personal tools
The Open Lighting Project has moved!

We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.

Avolite DMX Splitter

From wiki.openlighting.org

Jump to: navigation, search

Link: http://www.avolites.org.uk/products/dmx-splitters.htm
{{ #if: | Free! }}{{ #if: | Windows Support }}{{ #if: | Linux Support }}{{ #if: | Mac OS X Support }}{{ #if: yes | Sends DMX }}{{ #if: | Receives DMX }}{{ #if: | RDM Support }}{{ #if: | MIDI Support }}{{ #if: | HTTP Support }}

Avolites dmx.gif


The Avolites DMX splitter is now available in two versions: Rack or Truss mounting

Avolites DMX splitters will buffer, multiply, isolate and protect console DMX outputs.

The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's.

The Rack splitter provides four pairs of outputs and the Truss splitter three pairs. These are optically isolated from each other and can be standard 5 pin or 3 pin or 3 pin reverse. Internally, the circuit board carries spare IC's enabling you to get up-and-running again very fast in the case of an emergency.

Specifications

  • "DMX in" and "DMX loop out"
  • High brightness power and data LED's
  • Standard XLR5 ( optional XLR3 or XLR3 reverse polarity )
  • Internal circuit board carries spare IC's
  • Operates from any AC mains voltage from 85-265 volts