EDMX4

Link: http://dmxking.com/artnetsacn/edmx4-tx-rdm
Made by: DMXKing
{{ #if: | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: | }}{{ #if: | }}

Need more universes? eDMX4 is the answer you've been looking for. Built tough with plenty of mounting options the eDMX4 fits nicely in your lighting rig by simplifying cable runs and eliminating the need for DMX distribution amplifiers/splitters. Mount an eDMX4 closer to the rig and run Ethernet cable back to the controller and better still power the eDMX4 right back at the controller up to 70m / 210feet away using Power over Ethernet.

Supporting both DMX512 output (TX and RDM variant) and DMX512 input (only on RDM variant) individually configurable on each channel along with Art-Net and sACN (*coming soon - free firmware update) protocols the eDMX4 is an ideal choice for universe hungry lighting rigs. Flexible configuration permits 2 input DMX merge functionality too. Designed and manufactured in New Zealand to the highest standards. *NEW* Rack Mount option available now.

Main Features

• Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android....
• eDMX4 TX - 4x DMX512 Out
• eDMX4 RDM - 4x DMX512 Out or DMX512 In with E1.20 RDM support
• Merge 2 incoming Art-Net streams per output channel with both HTP and LTP options
• Merge Art-Net + DMX input -> DMX output(s)
• Merge 2x DMX input -> DMX output(s)
• Tough metal enclosure with multiple mounting options including 19" rack mount.
• Available with 3 pin or 5 pin XLR socket, no adapter purchase required.
• Power over Ethernet 802.3af compliant and etherCON for network connection.
• E1.11 Higher Protection Level “DMX512-A Protected” device.
• Fully compatible with *ALL* software and hardware that supports Art-Net, Art-Net II, and Art-Net 3 protocols.
• Configuration utility with basic Art-Net output/input test functionality.
• Firmware updates can be performed by end user.