We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
KarateLight
From wiki.openlighting.org
Link: http://karatelight.de
{{ #if: |
}}{{ #if: yes |
}}{{ #if: yes |
}}{{ #if: |
}}{{ #if: yes |
}}{{ #if: |
}}{{ #if: |
}}{{ #if: |
}}{{ #if: |
}}
There are two different Devices, both with the name KarateLight. They are both opensource and use the same protocol. Both are supported by the OLA karate-plugin. First there is a RGB-LED-Dimmer, originally created for ambient lighting on TVs. The second one, by the name of KarateLight-DMX is a simple and cheap USB2DMX Intererface. The first prototype only supports sending DMX, but RDM support will be added in the next hardware revision.

Hardware KarateLight Dimmer:
- 8/16 RGB Channels for 12V LED-Stripes
- 60 Watt Output Power (or 120Watt for 24V LEDs)
- 12Bit color resolution (Gamma-Lookup Table in the Firmware
- 1kHz PWM frequency
- Free Hardware. Get the schematic and build your own device
- Firmware-upgrade over USB

Hardware KarateLight-DMX:
- From USB to DMX (one way DMX; RDM will be added in the next version)
- The DMX data is buffered and the transmission is timed by the microcontroller
- USB powered
- No galvanic isolation (will be added in the next version)
- Free Hardware (CC-BY-NC-SA). Get the schematic and build your own device
- Firmware-upgrade over USB
Software:
- Supported by OLA on Linux
- Plugin support for most Enigma2 Settop-Boxes
- Supported by boblight (Win, Linux, Mac)
- Supported by AtmoWin (Windows)
- Supported by DFAtmo (Xbmc, VDR, xinelib)
- Firmware is based on the Microchip-USB-Stack for Pic18 Controllers which is free-as-in-beer but not free-as-in-speech. The non-Microchip parts are GPL.