Difference between revisions of "OLA Client API"

Revision as of 12:04, 2 May 2010

OLA provides a client library which allows other applications to send/receive DMX as well as control the OLA server. When writing a client application you have to choose between the StreamingClient and the full fledged OlaClient (provided by the SimpleClient helper class). The StreamingClient only allows a client to send DMX data to the OLA server, while the full client allows DMX data to be received and control messages to be sent to the server to change things like port patchings etc.

Example I: Sending an DMX update using the StreamingClient

The simplest interface to OLA is the StreamingClient which just allows an application to send DMX data to the OLA server

#include <stdlib.h>
#include <ola/Closure.h>
#include <ola/DmxBuffer.h>
#include <ola/Logging.h>
#include <ola/StreamingClient.h>

#include <iostream>                                                                                                          

using std::cout;
using std::endl;

/*
  * This is called if the remove end closes the connection
  */
int SocketClosed() {
  cout << "The OLA server closed the connection";
  return 0;
}

int main(int argc, char *argv[]) {
  unsigned int universe = 1;  // universe to use for sending data
  unsigned int i;

  // turn on OLA logging
  ola::InitLogging(ola::OLA_LOG_WARN, ola::OLA_LOG_STDERR);

  // Create a new DmxBuffer to hold the data
  ola::DmxBuffer buffer;
  // set all channels to 0
  buffer.Blackout();

  // create a new client and set the Error Closure
  ola::StreamingClient ola_client;
  ola_client.SetErrorClosure(ola::NewClosure(&SocketClosed));

  // Setup the client, this connects to the server
  if (!ola_client.Setup()) {
    cout << "Setup failed" << endl;
    exit(1);
  }
 
  // send the data to the ola server 
  for (i = 0; i < 100; i++) {
    buffer.SetChannel(0, i);
    if (!ola_client.SendDmx(universe, buffer)) {
      cout << "Send DMX failed" << endl;
      exit(1);
    }
    usleep(20000);   // sleep for 20ms between updates                                                                            
  }

  // close the connection
  ola_client.Stop();
  return 0;
}

Note there isn't any need to poll for updates from the server in this case because the communication is all one way (client -> server). This also means that you can't receive DMX data or modify state on the server (like port patching and device parameters) when using the StreamingClient.

Also take note of the call to usleep(). Without this you're likely to fill the network socket buffer at which point the client code will detect an error and close the socket (you may need to increase the number of loop iterations to trigger this).

Example II: Sending an DMX update using the SimpleClient

This example simply connects to the OLA Server and sends one DMX update just like the example above but using the SimpleClient. It's about as basic as you can get because it requires no callbacks and exits immediately. We use two classes in this example, ola::SimpleClient, and ola::OlaClient.

#include <ola/DmxBuffer.h>
#include <ola/Logging.h>
#include <ola/SimpleClient.h>
 
int main() {
  ola::InitLogging(ola::OLA_LOG_WARN, ola::OLA_LOG_STDERR);
  ola::DmxBuffer buffer;
  buffer.Blackout();
  // some dummy dmx data
  buffer.SetChannel(0, 255);
 
  ola::SimpleClient simple_client;
  if (!simple_client.Setup())
    //setup failed
    return -1;

  // Get the underlying OlaClient object
  ola::OlaClient *client = simple_client.GetClient();

  // Send the DMX data 
  client->SendDmx(1, buffer);
}

The main class used to communicate with the LLA Server is OlaClient. For ease of use, the SimpleClient class sets up OlaClient with a connection to an LLA Server running on the localhost:LLA_DEFAULT_PORT. You can call GetClient() on a SimpleClient instance to get a pointer to the underlying OlaClient.

Example III: Sending multiple updates

The previous example only sent a single DMX update before quitting. This next example adds a timeout which sends DMX every 50ms. This introduces a new class SelectServer which is used for registering timeouts.

 #include <ola/DmxBuffer.h>
 #include <ola/network/SelectServer.h>
 #include <ola/Logging.h>
 #include <ola/SimpleClient.h>
 #include <ola/Closure.h>
 
 // Maximum value of a dmx channel
 static const unsigned int MAX_DMX = 255;
 // How often to send updates
 static const unsigned int TIMEOUT_MS = 50;
 
 class DmxTimeout {
   public:
     DmxTimeout(ola::OlaClient *client): m_tick(0),
                                         m_client(client) {
       buffer.Blackout();
       m_buffer.SetChannel(0, MAX_DMX);
     }
 
     // Called on timeout
     int SendDmx() {
       m_buffer.SetChannel(1, m_tick)
       m_buffer.SetChannel(2, MAX_DMX - m_tick)
       m_client->SendDmx(1, buffer);
       m_tick++;
       m_tick %= MAX_DMX + 1;
       // we must return 0 else we get canceled
       return 0;
     }
   private:
     unsigned int m_tick;
     ola::DmxBuffer m_buffer;
     ola::OlaClient *m_client;
 };
 
 int main() {
   ola::InitLogging(ola::OLA_LOG_WARN, ola::OLA_LOG_STDERR);
   ola::SimpleClient simple_client;
 
   if (!simple_client.Setup())
     return -1;
 
   // Create a timeout and register it
   DmxTimeout timeout(simple_client.GetClient());
   ola::network::SelectServer ss = simple_client.GetSelectServer();
   ss->RegisterTimeout(TIMEOUT_MS,
                       ola::NewClosure(&timeout, &DmxTimeout::SendDmx),
                       true); // we want this to repeat
 
   // Start the main loop
   ss->Run();
 }

In this example we create DmxTimeout class whose SendDmx() method is called every time the timer expires.

The other important part here is the SelectServer. As well as the RegisterTimeout method we've used above, this can also be used to register sockets so we can respond to network activity. The Run() method starts the main event processing loop which will halt if an error occurs or Terminate() is called.

Example IV: Receiving DMX data

The third example shows how to listen and respond to event from the LLA server.

#include <ola/Logging.h>
#include <ola/SimpleClient.h>

static const unsigned int UNIVERSE = 1;

class OurObserver: public ola::OlaClientObserver {
  public:
    // Called when new DMX values arrive
    void NewDmx(unsigned int universe,
                const DmxBuffer &data, 
                const std::string &error) {
      OLA_INFO << "Received " << (int) data.Size() <<
        " channels for universe " << (int) universe;
    }
};

int main() {
  ola::InitLogging(ola::OLA_LOG_INFO, ola::OLA_LOG_STDERR);
  ola::SimpleClient simple_client;
  OurObserver observer;

  if (!simple_client.Setup())
    return -1;

  ola::OlaClient *client = simple_client.GetClient();
  // Set the observer and register our interest in this universe
  client->SetObserver(&observer);
  client->RegisterUniverse(UNIVERSE, ola::REGISTER);
  simple_client.GetSelectServer()->Run();
}

Here we inherit from the OlaClientObserver class and override the methods we're interested in receiving notification for.

In the main function we set the observer object and register our interest in a universe.

Example V: More complex client

The above is all well and good but what if the main application has it's own event processing loop? An example of this is a GTK/Glib application which uses GMainLoop.

On the other hand, what if you're not connecting to the LLA Server over TCP? Sometimes it may be desirable to embed the LLA server within the main application.

Bypassing the SimpleClient and using OlaClient directly addresses both these problems.

#include <ola/OlaClient.h>
#include <ola/select_server/SelectServer.h>
#include <ola/select_server/Socket.h>

using ola::select_server::PipeSocket;

int main() {
  // Create the select server
  ola::select_server::SelectServer ss;

  // Create the pipe socket to talk to the server on
  PipeSocket *pipe_socket = new PipeSocket();
  if (!pipe_socket->Init())
    return -1;

  // Remember to add this socket to the SelectServer
  ss.AddSocket(pipe_socket);

  // Setup the OlaClient
  ola::OlaClient client(pipe_socket);
  if (!client.Setup())
    return -1;

  // At this point the client is setup. We then need to setup the LLAServer
  // ...

  // Once that is done we add the pipe as a new connection
  ola_server->NewConnection(m_pipe_socket->OppositeEnd());
}

This example shows how we can create our own instance of a ConnectedSocket (PipeSocket is a subclass of ConnectedSocket) and pass it to the OlaClient to use. This code is very similar to what SimpleClient does under the hood.