We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "Velleman K8062"
From wiki.openlighting.org
| Line 5: | Line 5: | ||
| − | * This unit can control DMX fixtures using | + | * This unit can control DMX fixtures using USB interface |
* Test software and "DMX Light Player" software is included, a DLL is provided to write your own software | * Test software and "DMX Light Player" software is included, a DLL is provided to write your own software | ||
* Furthermore there is a stand-alone test function that outputs all 512 channels at a time, with adjustable levels | * Furthermore there is a stand-alone test function that outputs all 512 channels at a time, with adjustable levels | ||
| Line 14: | Line 14: | ||
| − | This is actually a very poor interface and not recommended. | + | This is actually a very poor interface and not recommended. The design of the K8062 means that it can only transfer 8 bytes of data every 10ms over the USB port, leading to a max frame rate of 1.6 full DMX frames / second. The Velleman USB protocol uses a simple form of compression which results in frames having a large number of 0 byte channels being sent faster. |
| + | If this number of channels used is kept small this limitation is unlikely to be noticed. Users that want to use a large number of channels at full rate are encouraged to apply the third party upgrade or switch to another interface. | ||
| − | The [[Velleman K8062 Upgrade]] describes a modification to the K8062 | + | The [[Velleman K8062 Upgrade]] describes the limitations of the original design and explains a modification to the K8062 which enables it to handle full frame rate DMX. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Supported under Linux and Mac with the [[Open Lighting Architecture]] | Supported under Linux and Mac with the [[Open Lighting Architecture]] | ||
[[Category:USB]] | [[Category:USB]] | ||
Revision as of 07:49, 18 May 2011
Link: http://www.velleman.be/ot/en/product/view/?id=353412
Made by: Velleman
{{ #if: | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}
- This unit can control DMX fixtures using USB interface
- Test software and "DMX Light Player" software is included, a DLL is provided to write your own software
- Furthermore there is a stand-alone test function that outputs all 512 channels at a time, with adjustable levels
- Kit includes:
- nice enclosure
- USB cable
- CD with: test software, DLL for own developments, free DMX light player
This is actually a very poor interface and not recommended. The design of the K8062 means that it can only transfer 8 bytes of data every 10ms over the USB port, leading to a max frame rate of 1.6 full DMX frames / second. The Velleman USB protocol uses a simple form of compression which results in frames having a large number of 0 byte channels being sent faster.
If this number of channels used is kept small this limitation is unlikely to be noticed. Users that want to use a large number of channels at full rate are encouraged to apply the third party upgrade or switch to another interface.
The Velleman K8062 Upgrade describes the limitations of the original design and explains a modification to the K8062 which enables it to handle full frame rate DMX.
Supported under Linux and Mac with the Open Lighting Architecture
