# Cavendish skin uses APIs deprecated in 1.42; keep those warnings out of the error log $wgDeprecationReleaseLimit = "1.41"; $wgEnableSidebarCache = true; $wgParserCacheType = CACHE_DB; OLAGuruPlug: Difference between revisions - wiki.openlighting.org
Personal tools
The Open Lighting Project has moved!

We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.

OLAGuruPlug: Difference between revisions

From wiki.openlighting.org

Jump to: navigation, search
← Older editNewer edit →
No edit summary
No edit summary
Line 1: Line 1:
[[Image:Guru-plug-setup.png|center]]
  __TOC__  
  __TOC__  
[[Image:Guru-plug-setup.png|center]]


This describes how to setup [[OLA]] installed on a [http://www.globalscaletechnologies.com/c-4-guruplugs.aspx GuruPlug]. These devices make excellent low cost [[DMX512]] nodes. For a list of compatible USB devices see the main [[OLA]] page.
This describes how to setup [[OLA]] on a [http://www.globalscaletechnologies.com/c-4-guruplugs.aspx GuruPlug]. These devices make excellent low cost [[DMX512]] nodes.
 
Features of this system:
* Wifi access point with internet connectivity
* RDM control either over DMX or [[ArtNet]]
* Protocol conversion to/from: E1.31, DMX512, ArtNet, ShowNet, Pathport, SandNet, ESP Net
 
Costs involved:
* GuruPlug, $99 +shipping
* Ethernet Switch, from $30
* USB DMX/RDM Interface, chose from [[Open_Lighting_Architecture#Supported Devices|Support Devices]], usually around $100-$300
* Wireless Cell Card, shop around. Make sure it works with Linux.


Features:
* 2 Gig Ethernet ports
* Wifi 802.11 b/g (not recommended for lighting control)
* 2 USB ports
* Cheap ($99US)


== Prerequisites ==
== Prerequisites ==


This assumes you have a shell on the guru plug and that it can contact the internet to download the packages. Note that the default guru plug is insecure and comes with a lot of extras (samba, mysql, lighthttpd etc.) that aren't required. Fixing this is outside the scope of this tutorial.
This assumes you have a shell on the guru plug and that it can contact the internet to download the packages. Note that the default guru plug is insecure and comes with a lot of extras (samba, mysql, lighthttpd etc.) that aren't required. Removing these is outside the scope of this tutorial.


== Installation ==
== Installation ==

Revision as of 19:12, 6 November 2010

This describes how to setup OLA on a GuruPlug. These devices make excellent low cost DMX512 nodes.

Features of this system:

  • Wifi access point with internet connectivity
  • RDM control either over DMX or ArtNet
  • Protocol conversion to/from: E1.31, DMX512, ArtNet, ShowNet, Pathport, SandNet, ESP Net

Costs involved:

  • GuruPlug, $99 +shipping
  • Ethernet Switch, from $30
  • USB DMX/RDM Interface, chose from Support Devices, usually around $100-$300
  • Wireless Cell Card, shop around. Make sure it works with Linux.


Prerequisites

This assumes you have a shell on the guru plug and that it can contact the internet to download the packages. Note that the default guru plug is insecure and comes with a lot of extras (samba, mysql, lighthttpd etc.) that aren't required. Removing these is outside the scope of this tutorial.

Installation

Add the following line to /etc/apt/sources.list: 

 deb http://www.nomis52.net/data/ola-arm ./


Then apt-get install ola: 

 $ apt-get update
 $ apt-get install olad

Setup

Add a user ola for the daemon to run as: 

 $ adduser ola

If you intend to use USB devices, you need to add this user to the plugdev & dialout groups. Modify the lines in /etc/group: 

 dialout:x:20:ola
 plugdev:x:46:ola

Finally add any udev rules that you'll need. See OLA Device Specific Configuration

Running

Change to the ola user and the start the daemon: 

 $ su ola
 $ olad -l 3

Now connect the the GuruPlug on port 9090 with your browser to configure it.

Questions

Ask on the mailing list http://groups.google.com/group/open-lighting

Retrieved from "https://wiki.openlighting.org/index.php?title=OLAGuruPlug&oldid=3524"