The Open Lighting Project has moved!
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "OLA Device Specific Configuration"
From wiki.openlighting.org
(No difference)
| |
Revision as of 21:48, 25 July 2009
StageProfi
This comes in two flavors, a USB model and an Ethernet/IP model.
device = /dev/ttyUSB0 device = 192.168.1.250
USB Pro
Mac
Make sure you install the drives: http://www.ftdichip.com/Drivers/VCP.htm
After a restart run:
ls /dev/cu.usbserial-*
And add the path to you ~/.lla/lla-usbpro.conf file:
device = /dev/cu.usbserial-0000101D
LLA also comes with a tool to update the firmware on a USB Pro:
./tools/usbpro_firmware -d /dev/cu.usbserial-0000101D -f <firmware_file>
