DmXLAN Node 1 - Revision history

Nomis52 at 15:21, 14 July 2009

2009-07-14T15:21:29Z

84.186.54.107 at 15:02, 2 July 2009

2009-07-02T15:02:08Z

Nomis52 at 03:50, 7 January 2007

2007-01-07T03:50:03Z

66.7.195.55 at 03:48, 7 January 2007

2007-01-07T03:48:55Z

New page

Link: http://www.elclighting.com/newweb/elc.htm#node1<br>
Made by: [[ELC Lighting]]<br>
{{Features|tx=yes|rx=yes}}

<img src='http://www.elclighting.com/newweb/images/elc/node1.jpg' style='margin:5px;' align='right'>

dmXLAN Node 1 is an Ethernet node allowing the conversion to Ethernet (Artnet protocol) of one DMX universe, input or output. For fixed installations, like theathers or conference centers etc., the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing to the bottom. This will avoid the connectors and cables to be on the way of foots or flight cases, trolley, etc. The Ethernet is connected internally through hardwire connection. In the truss mount version, an ETHERCON connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a build in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both case, the XLR5pin connector can be set up as a DMX input or output. Node 1 is powered thru the Ethernet cable, as specified by the IEEE 802.3 standard.

[[Category:ArtNet]]

← Older revision		Revision as of 15:21, 14 July 2009
Line 4:		Line 4:


−	dmXLAN Node 1 is an Ethernet node allowing the conversion to ~~Ethernet (Artnet protocol) of~~ one DMX universe~~, input~~ or ~~output~~. For fixed installations, like theathers or conference centers etc., the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing to the bottom. This will avoid the connectors and cables to be on the way of foots or flight cases, trolley, etc. The Ethernet is connected internally through hardwire connection. In the truss mount version, an ETHERCON connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a build in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both case, the XLR5pin connector can be set up as a DMX input or output. Node 1 is powered thru the Ethernet cable, as specified by the IEEE 802.3 standard.	+	dmXLAN Node 1 is an Ethernet node allowing the conversion from [[ArtNet]] to one [[DMX]] universe or visa versa. For fixed installations, like theathers or conference centers etc., the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing to the bottom. This will avoid the connectors and cables to be on the way of foots or flight cases, trolley, etc. The Ethernet is connected internally through hardwire connection. In the truss mount version, an ETHERCON connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a build in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both case, the XLR5pin connector can be set up as a DMX input or output. Node 1 is powered thru the Ethernet cable, as specified by the IEEE 802.3 standard.



	[[Category:ArtNet]]		[[Category:ArtNet]]

← Older revision		Revision as of 03:50, 7 January 2007
Line 3:		Line 3:
	{{Features\|tx=yes\|rx=yes}}		{{Features\|tx=yes\|rx=yes}}

−
−	~~<img src='http://www.elclighting.com/newweb/images/elc/node1.jpg' style='margin:5px;' align='right'>~~

	dmXLAN Node 1 is an Ethernet node allowing the conversion to Ethernet (Artnet protocol) of one DMX universe, input or output. For fixed installations, like theathers or conference centers etc., the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing to the bottom. This will avoid the connectors and cables to be on the way of foots or flight cases, trolley, etc. The Ethernet is connected internally through hardwire connection. In the truss mount version, an ETHERCON connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a build in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both case, the XLR5pin connector can be set up as a DMX input or output. Node 1 is powered thru the Ethernet cable, as specified by the IEEE 802.3 standard.		dmXLAN Node 1 is an Ethernet node allowing the conversion to Ethernet (Artnet protocol) of one DMX universe, input or output. For fixed installations, like theathers or conference centers etc., the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing to the bottom. This will avoid the connectors and cables to be on the way of foots or flight cases, trolley, etc. The Ethernet is connected internally through hardwire connection. In the truss mount version, an ETHERCON connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a build in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both case, the XLR5pin connector can be set up as a DMX input or output. Node 1 is powered thru the Ethernet cable, as specified by the IEEE 802.3 standard.

@@ Line 1: / Line 1: @@
-Link: http://www.elclighting.com/newweb/elc.htm#node1<br>
+Link: http://www.elclighting.com/web/index.php?option=com_content&task=view&id=104&Itemid=4<br>
 Made by: [[ELC Lighting]]<br>
 {{Features|tx=yes|rx=yes}}