wiki.openlighting.org - User contributions [en]

Category:Computer Interfaces

2007-01-05T03:04:42Z

75.211.126.30:

Computer interfaces

Category:USB Interfaces

2007-01-05T03:04:17Z

75.211.126.30:

USB Interfaces

[[Category:Computer Interfaces]]

Category:USB Interfaces

2007-01-05T03:03:48Z

75.211.126.30:

USB Interfaces

[[Category:Test]]

Category:USB Interfaces

2007-01-05T02:59:34Z

75.211.126.30:

USB Interfaces

[[Category::Computer Interfaces]]

Category:USB Interfaces

2007-01-05T02:59:00Z

75.211.126.30:

USB Interfaces

DMX USB Pro

2007-01-05T02:58:29Z

75.211.126.30:

[[Category:USB Interfaces]]

Main Page

2007-01-05T02:55:07Z

75.211.126.30:

=== LLA Live 0.2.0 Released ===

LLA Live 0.2.0 has been released with new features including a web-based lighting console, Sandnet support and the ability to use the Enttec Open DMX USB devices.

As always no install is required, simply boot from the CD and you have a multi-protocol DMX gateway.

This new release can be downloaded from [https://sourceforge.net/project/showfiles.php?group_id=126566&package_id=192352 Sourceforge] or the [[LLA page]]

=== ACN Specification now available ===

The final step in the ACN specification process has been completed and the full document is available now from [http://www.estafoundation.org/pubs.htm ESTA]. Priced at $40 US, it's available as either a PDF download or on CDROM.

=== ACN Finally Approved ! ===

On the 19th of October, the ANSI Board of Standards approved E1.17-2006, Entertainment Technology - Multipurpose Network Control Protocol Suite or simply known as ACN. No major changes have been made since the last public review and the document should be available for purchase in the next few weeks.

More than 5 years after ACN was first proposed, this marks the final step before manufactures can start shipping true ACN Compatible devices.

=== Unofficial DMX 4 Linux 2.6 Release ===

Bastien Andres has made an unofficial release of DMX 4 Linux for the 2.6 series of kernels. A number of drivers have been modified to compile cleanly on 2.6 and the build system has also been cleaned.

Some drivers do not compile or are incomplete, see the STATUS_BA file in the archive for more details.

Sources available [http://www.nomis52.net/data/sources/dmx4linux-2.9-ba-061001.tgz here]

=== Enttec Releases RDM Tools ===

Enttec have released two new programs for the USB Pro that demonstrates the device's RDM capabilities. RDM Controller and RDM Responder allow the device to be used as a RDM control and response node respectively.

Both programs require that the device be upgraded to the latest firmware (v2). It seems however that support for RDM comes at a price, the send DMX on change feature no longer exists in the latest version. This appears to be due to memory restrictions within the device.

Both programs are currently in beta, and Enttec would appreciate feedback especially when used with other RDM enabled devices.

See [http://www.enttec.com/rdm.php] for more details.

__NOTOC__

<big>'''MediaWiki has been successfully installed.'''</big>

Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.

== Getting started ==

* [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Help:FAQ MediaWiki FAQ]
* [http://mail.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]

Main Page

2007-01-05T02:54:43Z

75.211.126.30:

=== LLA Live 0.2.0 Released ===

LLA Live 0.2.0 has been released with new features including a web-based lighting console, Sandnet support and the ability to use the Enttec Open DMX USB devices.

As always no install is required, simply boot from the CD and you have a multi-protocol DMX gateway.

This new release can be downloaded from [https://sourceforge.net/project/showfiles.php?group_id=126566&package_id=192352 Sourceforge] or the [[LLA page]]

=== ACN Specification now available ===

The final step in the ACN specification process has been completed and the full document is available now from [http://www.estafoundation.org/pubs.htm ESTA]. Priced at $40 US, it's available as either a PDF download or on CDROM.

=== ACN Finally Approved ! ===

On the 19th of October, the ANSI Board of Standards approved E1.17-2006, Entertainment Technology - Multipurpose Network Control Protocol Suite or simply known as ACN. No major changes have been made since the last public review and the document should be available for purchase in the next few weeks.

More than 5 years after ACN was first proposed, this marks the final step before manufactures can start shipping true ACN Compatible devices.

=== Unofficial DMX 4 Linux 2.6 Release ===

Bastien Andres has made an unofficial release of DMX 4 Linux for the 2.6 series of kernels. A number of drivers have been modified to compile cleanly on 2.6 and the build system has also been cleaned.

Some drivers do not compile or are incomplete, see the STATUS_BA file in the archive for more details.

Sources available [http://www.nomis52.net/data/sources/dmx4linux-2.9-ba-061001.tgz here]

=== Enttec Releases RDM Tools ===

Enttec have released two new programs for the USB Pro that demonstrates the device's RDM capabilities. RDM Controller and RDM Responder allow the device to be used as a RDM control and response node respectively.

Both programs require that the device be upgraded to the latest firmware (v2). It seems however that support for RDM comes at a price, the send DMX on change feature no longer exists in the latest version. This appears to be due to memory restrictions within the device.

Both programs are currently in beta, and Enttec would appreciate feedback especially when used with other RDM enabled devices.

See [http://www.enttec.com/rdm.php] for more details.

__NOTOC__
__NOTITLE__

[UsbDmxPro]

<big>'''MediaWiki has been successfully installed.'''</big>

Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.

== Getting started ==

* [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Help:FAQ MediaWiki FAQ]
* [http://mail.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]

Open Lighting Architecture

2007-01-05T02:49:48Z

75.211.126.30:

Link: [http://www.nomis52.net/?section=projects&sect2=lla&page=llaintro]
Linux Compatible
Sends DMX
Receives DMX
Free

LLA Live is a stand-along bootable cd containing software from the Linux Lighting Architecture project.

LLA allows DMX sent using various DMX over IP protocols to be converted from one format to another. This enables devices from different manufacturers to talk to each another (for example a Strand Console can send DMX to an Enttec EtherGate).

When combined with a DMX USB Pro, LLA Live can send and receive data from traditional wired DMX networks.

<b>Related Products:</b>

* [[DMX USB Pro]]
* [[OpenDMX USB]]

Open Lighting Architecture

2007-01-05T02:48:11Z

75.211.126.30:

Link: [http://www.nomis52.net/?section=projects&sect2=lla&page=llaintro]
Linux Compatible
Sends DMX
Receives DMX
Free

LLA Live is a stand-along bootable cd containing software from the Linux Lighting Architecture project.

LLA allows DMX sent using various DMX over IP protocols to be converted from one format to another. This enables devices from different manufacturers to talk to each another (for example a Strand Console can send DMX to an Enttec EtherGate).

When combined with a DMX USB Pro, LLA Live can send and receive data from traditional wired DMX networks.

Related Products:

* [[DMX USB Pro]]
* [[OpenDMX USB]]

Open Lighting Architecture

2007-01-05T02:47:24Z

75.211.126.30:

Main Page

2007-01-05T02:44:19Z

75.211.126.30: /* LLA Live 0.2.0 Released */

=== LLA Live 0.2.0 Released ===

LLA Live 0.2.0 has been released with new features including a web-based lighting console, Sandnet support and the ability to use the Enttec Open DMX USB devices.

As always no install is required, simply boot from the CD and you have a multi-protocol DMX gateway.

This new release can be downloaded from [https://sourceforge.net/project/showfiles.php?group_id=126566&package_id=192352 Sourceforge] or the [[LLA page]]

=== ACN Specification now available ===

The final step in the ACN specification process has been completed and the full document is available now from [http://www.estafoundation.org/pubs.htm ESTA]. Priced at $40 US, it's available as either a PDF download or on CDROM.

=== ACN Finally Approved ! ===

On the 19th of October, the ANSI Board of Standards approved E1.17-2006, Entertainment Technology - Multipurpose Network Control Protocol Suite or simply known as ACN. No major changes have been made since the last public review and the document should be available for purchase in the next few weeks.

More than 5 years after ACN was first proposed, this marks the final step before manufactures can start shipping true ACN Compatible devices.

=== Unofficial DMX 4 Linux 2.6 Release ===

Bastien Andres has made an unofficial release of DMX 4 Linux for the 2.6 series of kernels. A number of drivers have been modified to compile cleanly on 2.6 and the build system has also been cleaned.

Some drivers do not compile or are incomplete, see the STATUS_BA file in the archive for more details.

Sources available [http://www.nomis52.net/data/sources/dmx4linux-2.9-ba-061001.tgz here]

=== Enttec Releases RDM Tools ===

Enttec have released two new programs for the USB Pro that demonstrates the device's RDM capabilities. RDM Controller and RDM Responder allow the device to be used as a RDM control and response node respectively.

Both programs require that the device be upgraded to the latest firmware (v2). It seems however that support for RDM comes at a price, the send DMX on change feature no longer exists in the latest version. This appears to be due to memory restrictions within the device.

Both programs are currently in beta, and Enttec would appreciate feedback especially when used with other RDM enabled devices.

See [http://www.enttec.com/rdm.php] for more details.

__NOTOC__

[UsbDmxPro]

<big>'''MediaWiki has been successfully installed.'''</big>

Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.

== Getting started ==

* [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Help:FAQ MediaWiki FAQ]
* [http://mail.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]

Main Page

2007-01-05T02:29:51Z

75.211.126.30:

=== LLA Live 0.2.0 Released ===

LLA Live 0.2.0 has been released with new features including a web-based lighting console, Sandnet support and the ability to use the Enttec Open DMX USB devices.

As always no install is required, simply boot from the CD and you have a multi-protocol DMX gateway.

This new release can be downloaded from [https://sourceforge.net/project/showfiles.php?group_id=126566&package_id=192352 Sourceforge] or the [http://www.opendmx.net/infusions/products_infusion/products_infusion.php?prod_id=36 LLA page]

=== ACN Specification now available ===

The final step in the ACN specification process has been completed and the full document is available now from [http://www.estafoundation.org/pubs.htm ESTA]. Priced at $40 US, it's available as either a PDF download or on CDROM.

=== ACN Finally Approved ! ===

On the 19th of October, the ANSI Board of Standards approved E1.17-2006, Entertainment Technology - Multipurpose Network Control Protocol Suite or simply known as ACN. No major changes have been made since the last public review and the document should be available for purchase in the next few weeks.

More than 5 years after ACN was first proposed, this marks the final step before manufactures can start shipping true ACN Compatible devices.

=== Unofficial DMX 4 Linux 2.6 Release ===

Bastien Andres has made an unofficial release of DMX 4 Linux for the 2.6 series of kernels. A number of drivers have been modified to compile cleanly on 2.6 and the build system has also been cleaned.

Some drivers do not compile or are incomplete, see the STATUS_BA file in the archive for more details.

Sources available [http://www.nomis52.net/data/sources/dmx4linux-2.9-ba-061001.tgz here]

=== Enttec Releases RDM Tools ===

Enttec have released two new programs for the USB Pro that demonstrates the device's RDM capabilities. RDM Controller and RDM Responder allow the device to be used as a RDM control and response node respectively.

Both programs require that the device be upgraded to the latest firmware (v2). It seems however that support for RDM comes at a price, the send DMX on change feature no longer exists in the latest version. This appears to be due to memory restrictions within the device.

Both programs are currently in beta, and Enttec would appreciate feedback especially when used with other RDM enabled devices.

See [http://www.enttec.com/rdm.php] for more details.

__NOTOC__

[UsbDmxPro]

<big>'''MediaWiki has been successfully installed.'''</big>

Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.

== Getting started ==

* [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Help:FAQ MediaWiki FAQ]
* [http://mail.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]

Main Page

2007-01-05T02:27:49Z

75.211.126.30: